Description
Specification of Aerosol cans
| Type | Diameter (MM/Inch) | Body Height
(MM) |
Dome Height
(MM) |
| Neck-In Can | 45D / 112# | 93-220 | 5.2 |
| Neck-In Can | 52D / 202# | 98-280 | 8.0/9.4 |
| Neck-In Can | 57D / 205# | 95-280 | 10 |
| Neck-In Can | 60D / 207.5# | 95-300 | 10 |
| Neck-In Can | 65D / 211# | 95-300 | 13.5 |
| 17 | |||
| 20.27 | |||
| Straight Wall Can | 65D / 211# | 95-300 | 20.27 |
Pressure Specification
We can meet requestment of standards as per different customers from different countries. Now we are following standards as below.
| USA | Deformation | Burst | ||
| 2N | 140PSI | 9.66Bar | 210PSI | 14.49Bar |
| 2P | 160PSI | 11.04Bar | 240PSI | 16.56ar |
| 2Q | 180PSI | 12.42Bar | 270PSI | 18.63Bar |
| EUROPE | Deformation | Burst | ||
| Standard 1 | 1.2Mpa | 12.0Bar | 1.44Mpa | 14.4Bar |
| Standard 2 | 1.5Mpa | 15.0Bar | 1.8Mpa | 18.0Bar |
| Standard 3 | 1.8Mpa | 18.0Bar | 2.16Mpa | 21.6Bar |
| GB-2008 | Deformation | Burst | ||
| Common | 1.2Mpa | 12.0Bar | 1.4Mpa | 14.0Bar |
| High Pressure | 1.8Mpa | 18.0Bar | 2.0Mpa | 20.0Bar |
Style of Dome and bottom
lTo meets different markets and customers, Haute opened different sharps and sizes of dome and bottom.
| Photo | Description | Photo | Description |
 |
Bottom for D45 ,D52 ,D57 ,D65NI ,D65SW |  |
D65NI Top (H=20.27MM) |
 |
D65NI Top (H=17MM) |  |
D65SW Top(H=20.27MM) |
 |
D65NI Top(H=13.5MM) |  |
D45 Top (H=5.2MM) |
 |
D52 Top (H=8MM) |  |
D57 Top (H=10MM) |
USA Can Specs Standard -1– According to CSPA
lUSA 202X708 NI 2Q
USA Can Specs Standard -2– According to CSPA
USA 211×604 SW 2Q
USA Can Specs Standard -3 – According to CSPA
USA 211×713 NI 2Q
- All the lacquer material had past FDA certification by 3rd inspection organization
- We have a record sheet to track the status of print and paint material, protect the stability of a material.
